
Sunday, November 29, 2009
Wallet

Monday, November 23, 2009
Pettiskirt
So here are my tips:
1. The measurements on Martha's site are for a very short, toddler size skirt. For older girls, you will need to add an inch or two to the width of each strip. You'll probably need at least 6 yards of the nylon chiffon.
2. Martha's tutorial suggests 1 1/2 yards of the satin charmeuse, but there is enough gather in the waistband to skimp a few inches and just get enough for the width of the band you need, from 8 to 12 inches of a 45/46 inch wide yardage for example.
3. Instead of measuring all those rectangles out of the fabric, I did a little math and approximated the following so I can just use my cutting pad and ruler and cut straight strips across the width of the fabric. The nylon chiffon I ordered was about 46 inches wide so I cut:
1st tier: 6 strips at 3.5 to 5 inches wide (depending on length of skirt)
2nd tier: 14 strips at 4.5 to 6 inches wide
Ruffle fluff: 38 strips at 2.5 inches wide (you don't need to make this wider regardless of skirt size)
4. It took me almost exactly one roll of elastic thread to finish all of the shirring for one skirt. (To shirr: hand roll elastic thread, without stretching, onto your bobbin and set the stitch length to a long setting. As you sew, the chiffon will gather up.)
5. When sewing the tiers together, put the ruffled/shirred layer on the bottom and the smooth layer on top so the ruffles don't catch on the sewing machine's presser foot.

Crinkle Monster

Refashion: Clearance Rack
I love the end of season clearance rack. I know, it's always picked over with extra large or small sizes, but I look for fabrics and details that I like and deal with the fit later. For example:
This creamy tank had some beautiful lace detail and was only .33 cents! (Good timing at Old Navy one day.) However, it was an XXL and the snow was flying the day I bought it. I took in the sides and left it long, which is perfect for tall me. It looks pretty layered under cardigans and jackets:
Example number two:
I don't know who could pull off this sun dress, even in the warm weather. It was large and let's face it, not a lot of coverage going on up top there. The bottom of the dress seemed heavy compared to the flimsy top. But, in addition to the clearance price, I loved the detail at the bottom of the skirt and the fullness of it. So sundress, becomes pretty skirt:
Example 3:
Another "i don't know who could pull this off" outfit, this one started as hoodie attached to very short shorts... but for cheap cheap cheap and a little adjusting I have a comfy tunic.



Wednesday, November 11, 2009
Sweater Dress How-to
So, how'd I make the sweater dresses? It was so easy! I took some wool sweaters and felted them by washing them in hot water. It shrinks them down a lot, so for Emma's dress it was a good thing I started with a XL men's sweater. I like to work with felted sweaters because they don't unravel at all when you cut them. You will need a sweater comb, or de-fuzzer to remove any pilling. I have seen similar projects made with sweaters of other fibers, I just haven't tried it yet and don't know about unraveling.
For the sleeveless dress I just used one of Emma's dresses as a guide, matched it up to the neckline and cut the sides. If you need to make the neck opening smaller you just take in the seam at the shoulder. I cut the flower from another sweater, lined it with iron-on interfacing to keep it from stretching, and sewed it onto the front. Then, I sewed down the sides and used a black binding around the armhole to finish it off.
For Ava's dress, I literally put my sweater on her inside out, and pinned (with a safety pin or two) the sides about where I needed to take it in. I sewed a seam down each side. Then I tried it on her again before I trimmed off the extra just to be sure... I did have to unpick and sew one side over, so I'm glad I hadn't cut yet. After making sure it fit, I trimmed off the extra. I took the collar off another sweater (I have a bag of unwearable, but full of potential sweaters) and sewed it into the neck. I used pieces of the same sweater to make the flowers for her hair clip and the front of her dress.
For the sleeveless dress I just used one of Emma's dresses as a guide, matched it up to the neckline and cut the sides. If you need to make the neck opening smaller you just take in the seam at the shoulder. I cut the flower from another sweater, lined it with iron-on interfacing to keep it from stretching, and sewed it onto the front. Then, I sewed down the sides and used a black binding around the armhole to finish it off.

Tuesday, November 10, 2009
Refashioned: Sweater Dresses
Dried arrangement

Subscribe to:
Posts (Atom)